A. facial precautions:
1. Do not twist when climbing, and the vamp is scratched or damaged. (such as genuine leather: toe, cover and outer waist, do not appear defective leather, such as insect spots, scratches, stains, etc.). Whether the material of cow velvet is faded or not, with a pair.
2. Do not be unsmooth, wrinkle or pockmarked. Toe tip must be smooth not hair Angle.
3. Check whether the trademark letters are correct and indispensable.
4. The inside of the toe head shall not be folded or stamped, and check whether it is suitable for climbing into the middle sole (consider putting the front port treasure to help the front half of the foot when making cotton shoes).
5. Check if there is any drawing under the middle bottom plate, if there is any missing or missing port, or if the port is not hard enough (especially after port must be hard).
6. Do not have floating line, broken line, more do not have no bottom line, jump needle.
7. Whether the ratio of toe tip warping is consistent or not, and whether the comparison is correct or not.
8. Compare the sample shoes to see whether the vamp is chromatic aberration, and whether the brightness and polishing effect are the same as the sample.
9. Do not allow the shoe barrel to be smooth, do not wrinkle, smooth zipper, lock mouth.
10. Smooth boot. Boot inside smooth, inside seam is in place.
11. Whether the boot is leaning back.
12. The shape of the instep arch must be standard, not caving in.
13. Whether the zipper is smooth, whether the stop slip, whether the fastness is enough, whether the trademark is correct.
14. Use the magic band to hook the shoes and check whether the adhesive force is up to standard.
B. notes for bottom:
1. Check whether the steel core of the middle bottom is made of fierce steel, whether the material of the middle bottom plate conforms to the company’s standards, and whether the hot bottom is rolled.
2. Try on whether it fits or not, and whether the high heel will shake unsteadily (this must be paid attention to).
3 big bottom, can not fade color, thickness, hardness to reach the standard (50-55).
There should be no foreign body in the shoes, and the nails in the shoes should be removed.
C. accessories:
1. All kinds of decorations: do not break, paint off, scratch hand, flying edge, do not be iron material, not easy to fall off.
2. Electrical embroidery needle spacing must be beautiful, can not fall off, not obvious color difference.
3. If the surface is decorated with beads and buttons, the fastness must be good (pull and pull to see if it falls off).