1

Different kinds of glass cups/ bottle/craft/glassware/mirror quality inspection :

Glass cap
Glass Mug
Glass bottle
Glass craft
Glass lampshade
Glass explosion-proof tubes
Glassware
Glass drying oven
Blown glassware
Table glassware
Glass mirror



Some common factors for glass cups/ bottle/craft/glassware/mirror quality control:


1.Color: compared with the sample, there shall be no obvious difference on the vision
2.Bubble: acceptable < 0.5 mm (1-2 parts, MAJ or less 0.5 mm to 1.0 mm or less 1 / parts
3.Damage: not acceptable
4.Black/stain: acceptable < 0.5 mm (1-2 parts, MAJ or less 0.5 mm to 1.0 mm or less 1 / parts
5.Scratched/touch/bruising: acceptable < 3.0 mm (1-2 parts, MAJ or less 3.0 mm to 6.0 mm or less 1 / parts, and there shall be no scraping the hand phenomenon
6.Deformation: acceptable < 0.2 mm (1-2 parts, MAJ or less 0.2 mm to 0.5 mm or less 1 / parts
7.Mixing: there shall be no mixing phenomenon
8. Edge/corner: the edge is smooth, there shall be no scratch, hand, collapse, collapse phenomenon
9. Others: thickness, High temperature resistance test,Real match


glass cups/ bottle/craft/glassware/mirror quality inspection

 


China Inspection |China Quality Control |Vietnam Inspection
All Rights Reserved: Eagle Eyes (CHINA) Quality Inspection Company.-*-CHINA Inspection Service-*-CHINA Quality Control-*-Factory Audit-*-QC Sourcing Agent-*-