Common problems
peel off at printing/paint
deformed mark at XX of goods
unclear/uneven printing at logo
big space at joint
header was detached from handle
untrimmed material at XX of goods
glue/ scratched/ dirt/ oil mark at XX of goods
crack mark at wooden
Key points of comb inspection
1. Check whether the appearance of the product is in good condition, whether the edge is smooth and whether there is any burr.
2. Confirm whether the plastic products are recycled materials (hard/crisp, smelly)
3. Confirm whether the humidity of wood products is within the permitted range of guests. LBD: 8-12%; Caesar: 9-14%.
4, whether the interface is firm, there is no big gap.
5. Whether the comb head and comb handle are firm and whether they will fall off/break off in normal use.
6. Is the assembly reasonable? Is it assembled according to the customer’s accessories? Is the rubber header tightly assembled with the brush header and cannot be exposed or too small?
7. If it is a brush, observe whether the bristles are firm and whether there are empty pores.
Comb test
1. During the inspection process, the hair transplantation should be normally pulled by hand to make it firm.
2. During the inspection, pull the comb head and comb handle by hand to check whether the glue sticks firmly and falls off.