A. facial precautions:
1. Do not twist when climbing, and the vamp is scratched or damaged. (such as genuine leather: toe, cover and outer waist, do not appear defective leather, such as insect spots, scratches, stains, etc.). Whether the material of cow velvet is faded or not, with a pair.
2. Do not be unsmooth, wrinkle or pockmarked. Toe tip must be smooth not hair Angle.
3. Whether the ratio of toe tip warping is consistent or not, and whether the comparison is correct or not.
4. Compare the sample shoes to see whether the vamp is chromatic aberration, and whether the brightness and polishing effect are the same as that of the sample shoes.
5. No floating line or broken line is allowed on the side, and no bottom line or jumping needle is allowed.
6. Whether the ratio of shoe face length matches a pair, the height of the inner and outer waist, and the height of the back heel, etc.
7. The inside of the toe head shall not be folded or stamped, and check whether it is suitable for climbing into the middle sole (consider putting the front port treasure to help the front half of the foot when making cotton shoes).
8. Check whether the trademark letters are correct, indispensable letters.
9. Check if there is any drawing under the middle bottom plate, if there is any missing or missing port, or if the port is not hard enough (especially after port must be hard).
B. notes for bottom:
1. Check whether the steel core of the middle bottom is made of hard steel and whether the bending resistance test is passed. Whether the combined materials of the middle bottom plate meet the requirements of the company, whether the radian of the middle bottom is consistent with the last, whether the bottom is rolled or not.
2. Whether the leather is PU material, whether there is color difference and whether the wear-resisting effect meets our company’s standard. Day skin and heel appear crack or pull off.
3. Whether the nail head on the heel seat is raised or collapsed. Whether there are spikes in the heel (protruding from the heel side).
4. Does the outsole match with the waterproof platform?
5. Whether it has passed the impact test and meets the requirements of the company.
6. Cracks or unplug and fall off with the outsole.
7. If it is firm in the process of heel mounting, add four screws to the screw. Test the tension.
8. There should be no foreign body in the shoes, and the nails in the shoes should be removed.
9. Outsole, cannot fade color, thickness, hardness to standard.
10. Whether the shoes fit or not, and whether the high heels will wobble (this must be paid attention to)
C. accessories:
1. All kinds of decorations: do not break, paint off, scratch hand, flying edge, do not be iron material, not easy to fall off.
2 electrical embroidery needle spacing must be beautiful, can not fall off, not obvious color difference.
3. If the surface is decorated with beads and buttons, the fastness must be good (pull and pull to see if it falls off).