1. Visual inspection
The appearance inspection method of latex gloves is visual inspection. After the gloves have been fully doubled, the inspection items include: holes, broken edges, adhesion, wrinkles, extra thin mouths, extra thick fingers, discoloration, stickiness, impurities ( Including dust), stains, pulp, air bubbles, etc.
2. Physical properties
Inspection According to the inspection methods specified in GB / T528-92 and GB / T3512-83, the tensile strength and elongation at break before and after aging are measured, and the measurement results must meet.
In addition to the above tests, a leak test is also performed on the inspection gloves. The method is performed in accordance with the provisions of GB10213-1995, and antistatic inspection.
3. Chemical composition
The chemical composition inspection mainly refers to the inspection of raw materials and auxiliary materials, such as natural rubber latex, ZnO, antioxidant, vulcanizing agent S, accelerator and other items according to the “latex industrial raw materials technical conditions test method compilation” relevant provisions.
4. Packaging, storage and transportation
This product does not distinguish between left and right-handed models and generally only counts.
Packaging form: According to the needs of the buyer.
Pay attention to waterproofing during storage and transportation to avoid damage during storage and transportation.